EMD 645

By -
The EMD 645 engine is a vast popular 2 stroke cycle medium speed diesel engine used in locomotive, marine, and stationary applications. The cylinders are arranged in a V-shape at 45 degrees. It is arguably one of the most successful engines ever produced by General Motors. This engine can be found at the heart of locomotives, pump houses, boats, power generators, etc all over the world. I'll try to make this post as high-level and not as boring as I can.

An EMD 645 at the heart of the Irish CIÉ 071 Class
Of course the F40PH uses the EMD 645

The 645 engine is based on the previously successful EMD 567 engine with an increase in bore from 8-1/2 to 9-1/16 inches.The stroke of the engine remained the same as the 567 engine at 10 inches. The number 645 denotes the cylinder displacement of the engine, at 645 cubic inches. Both engines employ a fabricated steel block of identical key dimensions. The change in displacement of the engine was done through a new power assembly where the cylinders were housed (props to the designers of the 567 for their vision for the engine's future evolution). The number 645, of course, denotes the engine displacement of 645 cubic inches per cylinder of the engine (the car guys still think your tiny little 450s or what not are big?). The engine came in roots blown (think supercharger) for lower or turbocharged for higher horsepower versions. The turbocharger has an ingenious overrunning clutch and only disengages when the engine is running at a sufficient speed to spin the turbo with its exhaust gas (in other words, the turbocharger acts as a supercharger at low rpm). The engine also comes in assorted numbers of cylinders, 8, 12, 16, or 20. Being a medium speed the engine runs at a maximum of 900 rpm.

The Australian G Class also has the 645
The engine had been through a vast number of iterations which maximized its efficiency. This engine is no longer in mass production but is still available from EMD (now part of Caterpillar) on a by-request basis. And because it is such a versatile, reliable, and durable workhorse, the 645 engine is also available in refreshed form from various sources.

Comments

Post a Comment

Popular posts from this blog

Briefly on the AAR Coupler Part 2

By -
Image
Last week, we've identified the Janney coupler and briefly looked at its elegant design. This week, let's, again, very briefly, look at the different types of Janney coupler that are widely used today. I will only talk about the head of the coupler, and ignore anything that the general public may need to trespass onto railroad property and get in a unsafe situation in order to have a good look at. As far as coupler heads are concerned, there are 3 types in used today. Type E, F, and H. Types E and F are used on freight, and H used on passenger equipment. Since the withdrawal of passenger service in North America by private railroads, the Type H standard is no longer maintained by the Association of American Railroads, a trade group formed of major freight railroads, but is under the control of the APTA, the American Public Transportation Association. Now let me introduce another term, slack. Slack is an allowed gap between two coupled up couplers. In other words, when most
Read more

Amtrak NPCU

By -
Image
The NPCU or Non-powered Control Units are control cars used by Amtrak that are modified from surplus EMD F40PH locomotives. A control car is a generic term for a non-powered railroad vehicle that can control operation of a train from the end opposite to the position of the locomotive. They can be used with diesel or electric motive power, allowing push-pull operation without the use of an additional locomotive. Control cars first appeared in the USA and France in 1960s. Trains operating with a locomotive at one end and a control car at the other do not require the locomotive to run around to the opposite end of the train when reversing direction. In the United States, most control cars are modified from retired locomotives by removing tractive equipment and adding side baggage doors and have been used on several passenger railroads. The control cars are connected through the consist of the train by standard AAR 27-wire multiple unit jumper cables. The NPCUs at Amtrak are a
Read more

Bombardier IORE

By Yi -
Image
For the readers who missed the posts in the past two weeks, we talked about the 110 mph General Electric diesel-electric locomotive P42DC Genesis (link here ) and once the flagship transcontinental passenger train of the Canadian Pacific Railway The Canadian (link here ). Let's take a break from passenger equipments and look at a very powerful freight locomotive this week.  The Bombardier IORE is a 12-axle twin-section electric locomotive designed exclusively for LKAB (Luossavaara-Kiirunavaara Aktiebolag), a Swedish mining company, to haul heavy (8,000 metric tonnes) iron ore trains (hence the name IORE) at 60 km/h (37 mph) in extreme Nordic weather conditions of northern Sweden and Norway.  It was first commissioned in Year 2000.  The IORE, or TRAXX H80AC, is an AC-propulsion locomotive that belongs in the TRAXX family of Bombardier locomotives.  The top speed of the IORE is 80 km/h (50 mph). The IORE uses 12 electric motors to power its axles (i.e. one motor per axle), t
Read more